At first glance, nothing is more simple as changing a light bulb. And yet, there are some precautions to take when you want to replace a light bulb. Besides, it is always interesting to understand why a bulb jumped. If you’re wondering how change a bulb halogen or classic, this page tells you everything!
Request free quotes for your work
How to change a light bulb?
If we tend to trivialize the replacement of a light bulb, remember that it is one electric operation like any other.
It is considered as the change of a light bulb is the most frequent contact of an individual with his electric installation. And, as with all other electrical work, it is not free of risk.
Instructions on how to change a light bulb
If you want to change a light bulb safely, some care must be taken absolutely.
Here are some tips from andyeducation that will help you to replace your bulbs without putting yourself in danger:
It is imperative to turn off the power switch before changing a bulb. In doubt (if you are unsure if the switch is turned ON or OFF), the safer is to cut off the power in the affected area of your home.
If the light bulb was lit there is little, the safer is to wait a few hours, because the glass is probably burning. Otherwise, you can wear work gloves to remove.
Use a ladder or a stable step stool to reach the light bulb, and sure to be stable to remove the bulb.
A screw bulb unscrews just on itself. If it is a bayonet bulb, you must press the bulb, then turn it on itself to remove notches.
To put a new bulb, make sure you buy a suitable model, and screw or pull on the bulb.
If the new bulb lights up when you include it in the holder, remove it immediately to avoid burning yourself! Then turn off the switch, and position the new bulb. Then, test the switch to make sure the bulb is working.
Important: always remember dry you hands. Don’t never approaching a grid with wet hands!
Changing a broken light bulb
If the bulb was broken in its location, attention to not hurt you! It is essential to wear work gloves to remove a broken light bulb.
Here’s how to change your broken light bulb:
First, pass the collector to be sure not to walk on glass. Also remember to turn off the power to avoid electric.
Go to the level of the light bulb using a stepladder.
Wearing work gloves, use fine tweezers to grab the socket (the metal part of the bulb) and unscrew.
It is imperative to cut the power before using the clamp. Remember that an electrical accident happened quickly!
Important: If it’s a light bulb low consumption who broke start to well ventilate the room and wait air is renewed. Place debris in a closed plastic bag, that you throw in the trash. Do not forget that these bulbs contain mercury, which may lead to poisoning.
Professionals in your area for free amount your electricity works
What bulb you choose?
When you buy a new bulb, make sure to check the base of your bulb. The gall is simply the system of screwing the bulb, which is unique to each lamp or lighting system.
Our advice? First remove the old bulb to check the size of his balls, and be sure to buy the right bulb for replacement in-store.
In France, we used three main types of units:
E27 Base: it’s the most common nerve to screw.
The nerve E14: it is a small nerve to screw, used on some bedside lamps.
The nerve B22: it’s the most common nerve to bayonet.
You must also take into account the bulb (LED or low consumption) model, as well as its power.
Remember that the choice of a light bulb participates to make savings on electricity in the long run. So, it is unnecessary to ask a too powerful light bulb in a simple place of passage. A 15 W bulb can largely suffice in a corridor.
Change a light bulb halogen
If you have halogen bulbs, you should know that halogen lamps may require specific handling.
This video shows you in detail how to change a halogen bulb:
Where to throw a light bulb?
Once you have removed your old bulb, be careful not to throw it in the trash!
It is very important to recycle light bulbs LED (shown here), as well as light bulbs low consumption (also called CFLs). There are containers for recycling the bulbs used in stores from DIY, supermarkets or recycling center.
Only incandescent and halogen bulbs should be discarded in the trash classic. But as they gradually withdrew from the sale, we can very soon that all bulbs should be recycled!
Now you know everything you need know to replace a light bulb. If you are looking to start interior light works, this page details for you the budget for such a project.
The Other Half of Changing Someone’s Opinion
Changing light bulb on 2010 TSX Gear Shifter
DIY: Change/Upgrade Factory D3S HID Headlight Bulbs
1000+ Great Environment Photos · Pexels · Free Stock Photos
Christmas Gag Gifts for Sons-in-Law
Electric Light bulb
The need of electrical lighting in the modern household …
회의의 목적은 결론, 아이디어를 도출해 내는 것이다 :: 행간을 노닐다
How to Cope With Crazy
Heathrow built Terminal 5 without a way of changing the …
The BlackBerry Revolution Will Not Be Televised
VIDJA Floor lamp White 138 cm
E27 E14 GU10 3W Dimmable Remote Control RGB Color Change …
How Long Does It Take To Change A Light Bulb? (Marriage …
How to Change a Tail Light Bulb on Nissan Versa Hatchback
How to change a light bulb HALO 4" Recessed Can